Akfix 805 Insulation Spray Foam is a single-component, moisture-curing and self-expanding aerosol polyurethane foam. It is designed for easy dispensing through the straw adapter included with each can. Foam expanding sealant does not contain any propellant gases that are harmful to the ozone layer.

Akfix 805 Polyurethane Foam Spray can be used on window and door frames, big gaps, joints, cavities, electrical outlets, water pipes, etc. It is also used for filling of penetrations in walls. After the application, this expanding foam insulation spray is recommended to be used with 800C Spray Foam Cleaner which is sold separately. Akfix 805 Waterproof Spray Foam Insulation Can should be shaken at least 20 times before use. When applied it should be turned down. Strongly recommended not to press the trigger hard if you use it for the first time. Make sure to wear protective gloves, safety glasses, and protective clothing during the process. You can wait 24 hours for a full cure. Cured foam dries rigid and can be trimmed, shaped and sanded.

Akfix 805 PU Foam is a product that water-proof, over paintable. NOTE: This window insulation spray foam adheres to almost all building materials with the exception of surfaces such as polyethylene, teflon, silicone and surfaces contaminated with oils and greases, mold release agents and similar materials.

Akfix 805 Big Gap Filler Spray Foam includes 1 qty Expanding Foam Can.

Akfix 805 Spray Foam Insulation Harmful by inhalation. Irritating to eyes, respiratory system and skin. Do not breathe spray/vapour. Use only in well-ventilated areas. It is a pressurized container. Keep away from direct sunlight and do not expose temperatures over 50 °C. Do not pierce or burn the product, even after use. Keep away from sources of ignition, no smoking.

Storage above +25 °C and below +5 °C shortens shelf life. Akfix 805 Polyurethane Spray Foam should be stored and transported in vertical position. It also should be kept in room temperature for at least 12 hours before the application. Paint or coat the cured foam for best results in outdoor applications. NOTE: Cured foam will discolor if exposed to ultraviolet light.